SA516 Grade 450

SA516 Grade 450

Product : SA516 Grade 450 steel

SA516 Grade 450 steel is in low carbon steel pressure vessels,ASME standard execution

SA516 Grade 450 steel Features: good impact resistance, low temperature deformation, good weldability, good fatigue resistance, good anti-cracking performance layered Caesar, micro-alloyed, high purity, low carbon equivalent, strong anti-hydrogen sulfide, the product has good dimensional tolerances and surface quality.

SA516 Grade 450 chemical composition

C	Mn	Si	S	P
0.015-0.17	1.12-1.14	0.27-0.29	0.003-0.001	0.012-0.008

SA516 Grade 450 Mechanical Properties

σs(MPa)	σb(MPa)	δ(%)
367	531	29
370	542	31

JW supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to SA516 Grade 450 steel

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com

Tel 86,371,65777179

SA516 Grade 55

SA516 Grade 55

SA516 Grade 55 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.

SA516 Grade 55 steel grade is used in moderate and lower temperature pressure vessels steel because of the steel material chemical composition and the property in welding.

SA516 Grade 55 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. AMSE SA516 grade plates over 40mm in thickness shall be normalized.

SA516 Grade 55 Mechanical Property :

Grade	Thickness	Yield	Tensite	Elongation
SA516 grade 55	mm	Min Mpa	Mpa	Min %
	6-50	205	380-515	27%
	50-200	205	380-515	23%

JW is a large agent of mill in China and we are specialized in super thick SA516 Grade 55 steel plate. we keep more than 10000 ton SA516 Grade 55 steel spot every month and promise the competitive price in order to enlarge our oversea market.

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S960QL HSLA steel plate

EN10025-6-S960QL HSLA steel plate

Key words : EN 10025-6 S960QL High strength steel plate, EN 10025-6S960QLhigh strength low alloy steel plate, EN 10025-6 S960QL quenched and tempered steel plate

EN 10025-6S960QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S960QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S960QL steel material can be produced asS960QL steel plate, S960QL steel sheet, S960QL steel bar, S960QL section steel, S960QL structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S960QL steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S960QL steel supplier, hot rolled and cold rolled S960QL steel manufacturer, hot rolled and cold rolled S960QL steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S960QLcompetitive price, hot rolled and cold rolled S960QLgood quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S890QL1 HSLA steel plate

EN10025-6-S890QL1 HSLA steel plate

Key words : EN 10025-6 S890QL1 High strength steel plate, EN 10025-6S890QL1high strength low alloy steel plate, EN 10025-6 S890QL1quenched and tempered steel plate

EN 10025-6S890QL1 high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S890QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S890QL1 steel material can be produced asS890QL1 steel plate, S890QL1 steel sheet, S890QL1 steel bar, S890QL1 section steel, S890QL1 structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S890QL1 steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S890QL1 steel supplier, hot rolled and cold rolled S890QL1 steel manufacturer, hot rolled and cold rolled S890QL1 steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S890QL1competitive price, hot rolled and cold rolled S890QL1 good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S890QL HSLA steel plate

EN10025-6-S890QL HSLA steel plate

Key words : EN 10025-6 S890QL High strength steel plate, EN 10025-6S890QLhigh strength low alloy steel plate, EN 10025-6 S890QLquenched and tempered steel plate

EN 10025-6S890QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S890QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S890QL steel material can be produced asS890QL steel plate, S890QL steel sheet, S890QL steel bar, S890QL section steel, S890QL structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S890QL steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S890QL steel supplier, hot rolled and cold rolled S890QL steel manufacturer, hot rolled and cold rolled S890QL steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S890QLcompetitive price, hot rolled and cold rolled S890QL good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S960Q HSLA steel plate

EN10025-6-S960Q HSLA steel plate

Key words : EN 10025-6 S960Q High strength steel plate, EN 10025-6S960Qhigh strength low alloy steel plate, EN 10025-6 S960Q quenched and tempered steel plate

EN 10025-6S960Q high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S960Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S960Q steel material can be produced asS960Q steel plate, S960Q steel sheet, S960Q steel bar, S960Q section steel, S960Q structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S960Q steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S960Q steel supplier, hot rolled and cold rolled S960Q steel manufacturer, hot rolled and cold rolled S960Q steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S960Qcompetitive price, hot rolled and cold rolled S960Qgood quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S890Q HSLA steel plate

EN10025-6-S890Q HSLA steel plate

Key words : EN 10025-6 S890Q High strength steel plate, EN 10025-6S890Qhigh strength low alloy steel plate, EN 10025-6 S890Q quenched and tempered steel plate

EN 10025-6S890Q high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S890Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S890Q steel material can be produced asS890Q steel plate, S890Q steel sheet, S890Q steel bar, S890Q section steel, S890Q structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S890Q steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S890Q steel supplier, hot rolled and cold rolled S890Q steel manufacturer, hot rolled and cold rolled S890Q steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S890Qcompetitive price, hot rolled and cold rolled S890Q good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S690Q HSLA steel plate

EN10025-6-S690Q HSLA steel plate

Key words : EN 10025-6 S690Q High strength steel plate, EN 10025-6S690Qhigh strength low alloy steel plate, EN 10025-6 S690Q quenched and tempered steel plate

EN 10025-6S690Qhigh strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S690Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S690Q steel material can be produced asS690Q steel plate, S690Q steel sheet, S690Q steel bar, S690Q section steel, S690Q structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S690Q steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S690Q steel supplier, hot rolled and cold rolled S690Q steel manufacturer, hot rolled and cold rolled S690Q steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S690Qcompetitive price, hot rolled and cold rolled S690Q good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S690QL HSLA steel plate

EN10025-6-S690QL HSLA steel plate

Key words : EN 10025-6 S690QL High strength steel plate, EN 10025-6S690QLhigh strength low alloy steel plate, EN 10025-6 S690QL quenched and tempered steel plate

EN 10025-6S690QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S690QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S690QL steel material can be produced asS690QL steel plate, S690QL steel sheet, S690QL steel bar, S690QL section steel, S690QL structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S690QL steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S690QL steel supplier, hot rolled and cold rolled S690QL steel manufacturer, hot rolled and cold rolled S690QL steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S690QLcompetitive price, hot rolled and cold rolled S690QL good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690QL

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S690QL1HSLA steel plate

EN10025-6-S690QL1HSLA steel plate

Key words : EN 10025-6 S690QL1 High strength steel plate, EN 10025-6S690QL1high strength low alloy steel plate, EN 10025-6 S690QL1 quenched and tempered steel plate

EN 10025-6S690QL1high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S690QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S690QL1 steel material can be produced asS690QL1 steel plate, S690QL1 steel sheet, S690QL1 steel bar, S690QL1 section steel, S690QL1 structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S690QL1 steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S690QL1 steel supplier, hot rolled and cold rolled S690QL1 steel manufacturer, hot rolled and cold rolled S690QL1 steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S690QL1competitive price, hot rolled and cold rolled S690QL1 good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S690QL

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S620QL HSLA steel plate

EN10025-6-S620QL HSLA steel plate

Key words : EN 10025-6 S620QL High strength steel plate, EN 10025-6S620QLhigh strength low alloy steel plate, EN 10025-6 S620QL quenched and tempered steel plate

EN 10025-6SS620QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S620QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S620QL steel material can be produced as S620QL steel plate, S620QL steel sheet, S620QL steel bar, S620QL section steel, S620QL structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S620QL steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S620QL steel supplier, hot rolled and cold rolled S620QL steel manufacturer, hot rolled and cold rolled S620QL steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S620QLcompetitive price, hot rolled and cold rolled S620QL good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S620Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S620Q HSLA steel plate

Key words : EN 10025-6 S620Q High strength steel plate, EN 10025-6S620Qhigh strength low alloy steel plate, EN 10025-6 S620Q quenched and tempered steel plate

EN10025-6-S620Q HSLA steel plate

EN 10025-6S620Q high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S620Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S620Q steel material can be produced as S620Q steel plate, S620Q steel sheet, S620Q steel bar, S620Q section steel, S620Q structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S620Q steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S620Q steel supplier, hot rolled and cold rolled S620Q steel manufacturer, hot rolled and cold rolled S620Q steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S620Qcompetitive price, hot rolled and cold rolled S620Q good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S620Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S620QL1 HSLA steel plate

EN10025-6-S620QL1 HSLA steel plate

Key words : EN 10025-6 S620QL1 High strength steel plate, EN 10025-6S620QL1high strength low alloy steel plate, EN 10025-6 S620QL1 quenched and tempered steel plate

EN 10025-6SS620QL1 high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S620QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S620QL1 steel material can be produced as S620QL1 steel plate, S620QL1 steel sheet, S620QL1 steel bar, S620QL1 section steel, S620QL1 structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S620QL1 steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S620QL1 steel supplier, hot rolled and cold rolled S620QL1 steel manufacturer, hot rolled and cold rolled S620QL1 steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S620QL1competitive price, hot rolled and cold rolled S620QL1 good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1,S620Q

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-SS550QL HSLA steel plate

EN10025-6-SS550QL HSLA steel plate

Key words : EN 10025-6 S550QL High strength steel plate, EN 10025-6 S550QL high strength low alloy steel plate, EN 10025-6 S550QL quenched and tempered steel plate

EN 10025-6S550QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

S550QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S550QL steel material can be produced as S550QL steel plate, S550QL steel sheet,S550QL steel bar, S550QL section steel, S550QLstructural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S550QL steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S550QL steel supplier, hot rolled and cold rolled S550QL steel manufacturer, hot rolled and cold rolled S550QL steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S550QL competitive price, hot rolled and cold rolled S550QL good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-39MnCrB5-2 structural alloy steel

BS EN 10083-39MnCrB5-2 structural alloy steel

Key words:BS EN 10083-39MnCrB5-2,39MnCrB5-2structural alloy steel.39MnCrB5-2 structural alloy steel plate,39MnCrB5-2structural alloy steel plate sheet
39MnCrB5-2 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,39MnCrB5-2 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 39MnCrB5-2 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 39MnCrB5-2steel supplier, 39MnCrB5-2 steel manufacturer, 39MnCrB5-2 steel exporter, please contact JW steel's sales team. We will give you the 39MnCrB5-2 competitive price, 39MnCrB5-2 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5,38MnB5,27MnCrB5-2,33MnCrB5-2

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-6-S550QL1 HSLA steel plate

Key words : EN 10025-6 S550QL1 High strength steel plate, EN 10025-6 S550QL1 high strength low alloy steel plate, EN 10025-6 S550QL1 quenched and tempered steel plate

EN10025-6-S550QL1 HSLA steel plate

EN 10025-6S550QL1 high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.

Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm

S550QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

S550QL steel material can be produced as S550QL1 steel plate, S550QL1 steel sheet, S550QL1 steel bar, S550QL1 section steel,S550QL1structural shapes

JW steel keeps more than 10,000 tons hot rolled and cold rolled S550QL1 steel in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find hot rolled and cold rolled S550QL1 steel supplier, hot rolled and cold rolled S550QL1 steel manufacturer, hot rolled and cold rolled S550QL1 steel exporter, please contact JW steel's sales team. We will give you the hot rolled and cold rolled S550QL1 competitive price, hot rolled and cold rolled S550QL1 good quality and best service from us.

Reference Link:(EN10025-6)S550Q, (EN10025-6)S550QL, (EN10025-6)S550QL1

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-38MnB5 structural alloy steel

BS EN 10083-38MnB5 structural alloy steel

Key words:BS EN 10083-38MnB5,38MnB5structural alloy steel.38MnB5structural alloy steel plate,38MnB5structural alloy steel plate sheet
38MnB5 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,38MnB5Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 38MnB5 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 38MnB5steel supplier, 38MnB5 steel manufacturer, 38MnB5 steel exporter, please contact JW steel's sales team. We will give you the 38MnB5 competitive price, 38MnB5 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5,38MnB5

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-30MnB5 structural alloy steel

BS EN 10083-30MnB5 structural alloy steel

Key words:BS EN 10083-30MnB5,30MnB5structural alloy steel.30MnB5structural alloy steel plate,30MnB5 structural alloy steel plate sheet
30MnB5 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,20MnB5Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 30MnB5 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 30MnB5steel supplier, 30MnB5 steel manufacturer, 30MnB5 steel exporter, please contact JW steel's sales team. We will give you the 30MnB5 competitive price, 30MnB5 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-33MnCrB5-2 structural alloy steel

BS EN 10083-33MnCrB5-2 structural alloy steel

Key words:BS EN 10083-33MnCrB5-2,33MnCrB5-2structural alloy steel.33MnCrB5-2 structural alloy steel plate,33MnCrB5-2structural alloy steel plate sheet
33MnCrB5-2 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,33MnCrB5-2 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 33MnCrB5-2 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 33MnCrB5-2steel supplier, 33MnCrB5-2 steel manufacturer, 33MnCrB5-2 steel exporter, please contact JW steel's sales team. We will give you the 33MnCrB5-2 competitive price, 33MnCrB5-2 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5,38MnB5,27MnCrB5-2,33MnCrB5-2

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-27MnCrB5-2 structural alloy steel

 BS EN 10083-27MnCrB5-2 structural alloy steel

Key words:BS EN 10083-27MnCrB5-2,327MnCrB5-2structural alloy steel.27MnCrB5-2 structural alloy steel plate,27MnCrB5-2structural alloy steel plate sheet
27MnCrB5-2 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,27MnCrB5-2 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 27MnCrB5-2 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 27MnCrB5-2steel supplier, 27MnCrB5-2 steel manufacturer, 27MnCrB5-2 steel exporter, please contact JW steel's sales team. We will give you the 27MnCrB5-2 competitive price, 27MnCrB5-2 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5,38MnB5,27MnCrB5-2

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-20MnB5 structural alloy steel

BS EN 10083-20MnB5 structural alloy steel

Key words:BS EN 10083-20MnB5,20MnB5structural alloy steel.20MnB5structural alloy steel plate,20MnB5structural alloy steel plate sheet
20MnB5 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,20MnB5Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 20MnB5 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 20MnB5 steel supplier, 20MnB5 steel manufacturer, 20MnB5 steel exporter, please contact JW steel's sales team. We will give you the 20MnB5 competitive price, 20MnB5 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

BS EN 10083-25CrMo4 structural alloy steel

BS EN 10083-25CrMo4 structural alloy steel

Key words:BS EN 10083-25CrMo4,25CrMo4 structural alloy steel.25CrMo4 structural alloy steel plate,25CrMo4structural alloy steel plate sheet
25CrMo4 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of a certain amount of alloy element in steel,25CrMo4 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.

JW steel keeps more than 10,000 tons 25CrMo4 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find 25CrMo4 steel supplier, 25CrMo4 steel manufacturer, 25CrMo4 steel exporter, please contact JW steel's sales team. We will give you the 25CrMo4 competitive price, 25CrMo4 good quality and best service from us.

Reference Link:  20MnB5, 22MnB ,30MnB5,38MnB5,27MnCrB5-2,33MnCrB5-2,25CrMo4

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-S355N low alloy and high strength steel

Key words:EN10025-S355N, S355N low alloy steel,S355N high strength steel, EN10025-S355N low alloy and high strength steel plate

S355N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.

S355N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm

S355N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.

JW steel keeps more than 10,000 tons S355N steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S355N steel supplier, S355N steel manufacturer,S355N steel exporter, please contact JW steel's sales team. We will give you the S355N competitive price, S355N good quality and best service from us.

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10025-S355NL low alloy and high strength steel

EN10025-S355NL low alloy and high strength steel

Key words:EN10025-S355NL, S355NL low alloy steel,S355NL high strength steel, EN10025-S355NL low alloy and high strength steel plate

S355NL are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.

S355NL Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm

S355NL Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.

JW steel keeps more than 10,000 tons S355NL steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S355NL steel supplier, S355NL steel manufacturer,S355NL steel exporter, please contact JW steel's sales team. We will give you the S355NL competitive price, S355NL good quality and best service from us.

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10155-S355J2G2W Weathering resistant structural steel

EN10155-S355J2G2W Weathering resistant structural steel

Key words:S355K1G1W Corten steel, S355K1G1W Weathering steel, S355K1G1W Weathering resistant steel, S355K1G1W atmosphere corrosion resistance steel

S355K1G1W is very popular steel grades in weathering resistant steel in the European standard .Their resistant performance is better than the common welding structural steel.

Size range for S355K1G1W steel plate and flat bar is : 1.2-150mm * 1000-3800mm * 3000-18000 mm
Size range for S355K1G1W sections shapes is : 1.2-40mm (thickness)
Size range for S355K1G1W rods or round bar is : 10-60 mm (diameter)

JW steel keeps more than 10,000 tons S355K1G1W steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S355K1G1W steel supplier, S355K1G1W steel manufacturer, S355K1G1W steel exporter, please contact JW steel's sales team. We will give you the S355K1G1W competitive price,S355K1G1W good quality and best service from us.

Reference Link : Corten A, Corten B, S355J2G1W, S355J2G2W, S355J1G1W,S355K1G1W

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN10155-S355K2G2W Weathering resistant structural steel

EN10155-S355K2G2W Weathering resistant structural steel

Key words:S355K2G2W Corten steel, S355K2G2W Weathering steel, S355K2G2W Weathering resistant steel, S355K2G2W atmosphere corrosion resistance steel

S355K2G2W is very popular steel grades in weathering resistant steel in the European standard .Their resistant performance is better than the common welding structural steel.

Size range for S355K2G2W steel plate and flat bar is : 1.2-150mm * 1000-3800mm * 3000-18000 mm
Size range for S355K2G2W sections shapes is : 1.2-40mm (thickness)
Size range for S355K2G2W rods or round bar is : 10-60 mm (diameter)

JW steel keeps more than 10,000 tons S355K2G2W steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S355K2G2W steel supplier, S355K2G2W steel manufacturer, S355K2G2W steel exporter, please contact JW steel's sales team. We will give you the S355K2G2W competitive price,S355K2G2W good quality and best service from us.

Reference Link : Corten A, S355J2G1W, S355J2G2W, S355J1G1W,S355K1G1W,S355K2G2W

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

EN 10025-5 S355J2W steel sheet/Plate

EN 10025-5 S355J2W steel sheet/Plate

S355J2W steel is a kind of improved atmospheric corrosion resistance steel. Improved atmospheric corrosion resistance steel means weathering steel or atmosphere corrosion resistance steel. The material No. Of S355J2W is 1.8965

EN 10025-5 S355J2W steel material can be produced into S355J2W steel sheet, S355J2W steel plate ,S355J2W section steel, S355J2W steel rods, S355J2W steel flat bars and steel bars.

S355J2W steel V shaped impact test temperature is at -20 degree and min energy is 27J

Size range for S355J2W steel plate  and flat bar is : 1.2-150mm * 1000-3800mm * 3000-18000 mm
Size range for S355J2W steel sections shapes is : 1.2-150mm (thickness)
Size range for S355J2W steel rods : diameters max 60mm
Size range for S355J2W steel bars : thickness max 150mm


JW steel keeps more than 10,000 tons S355J2W steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find S355J2W steel supplier, S355J2W steel manufacturer, S355J2W steel exporter, please contact JW steel's sales team. We will give you the S355J2W competitive price, S355J2W good quality and best service from us.

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

SA-225M Gr.C  Specification :
ASME SA225 Gr.C is a kind of Mn-V-Ni alloy steel material used to fabric high temperature pressure vessels. Obviously, SA225 this property is based on it's Mn, V, Ni composition. ASME SA-225/SA-225M SA225 has two grades or levels-- Grade C and D .

SA-225M Gr.C Standard: ASME SA-225/SA-225M
SA-225M Gr.C Steel Grade : SA-225 Gr.D steel.
SA-225M Gr.C Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
SA-225M Gr.C MOQ: 1 PC
SA-225M Gr.C Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

SA-225M Gr.C  Specification :
ASME SA225 Gr.C is a kind of Mn-V-Ni alloy steel material used to fabric high temperature pressure vessels. Obviously, SA225 this property is based on it's Mn, V, Ni composition. ASME SA-225/SA-225M SA225 has two grades or levels-- Grade C and D .

SA-225M Gr.C Standard: ASME SA-225/SA-225M
SA-225M Gr.C Steel Grade : SA-225 Gr.D steel.
SA-225M Gr.C Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
SA-225M Gr.C MOQ: 1 PC
SA-225M Gr.C Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

Supply Mn-V-Ni alloy steel plates for pressure vessels ASME SA-225M Gr.C

SA-225M Gr.C  Specification :
ASME SA225 Gr.C is a kind of Mn-V-Ni alloy steel material used to fabric high temperature pressure vessels. Obviously, SA225 this property is based on it's Mn, V, Ni composition. ASME SA-225/SA-225M SA225 has two grades or levels-- Grade C and D .

SA-225M Gr.C Standard: ASME SA-225/SA-225M
SA-225M Gr.C Steel Grade : SA-225 Gr.D steel.
SA-225M Gr.C Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
SA-225M Gr.C MOQ: 1 PC
SA-225M Gr.C Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Supply Mo-alloy steel plates for pressure vessels ASME SA-204/SA-204M Gr.C

Supply Mo-alloy steel plates for pressure vessels ASME SA-204/SA-204M Gr.C

Specification :
ASME SA204 Gr.C is a kind of Mo-alloy steel plates for pressure vessels.ASME SA204 Gr.C material is used to fabric high temperature pressure vessels. Obviously, SA204 this property is based on it's Mo composition. ASME SA-204/SA-204M SA204 has three grades or levels-- Grade A/B/C.

Standard: ASME SA-204/SA-204M
Steel Grade : SA-204 Gr.A ,SA-204 Gr.B steel.
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Best quality Mo-alloy steel plates for pressure vessels ASME SA-204/SA-204M Gr.B

Best quality Mo-alloy steel plates for pressure vessels ASME SA-204/SA-204M Gr.B

Specification :
ASME SA204 Gr.B is a kind of Mo-alloy steel plates for pressure vessels.ASME SA204 Gr.B material is used to fabric high temperature pressure vessels. Obviously, SA204 this property is based on it's Mo composition. ASME SA-204/SA-204M SA204 has three grades or levels-- Grade A/B/C.

Standard: ASME SA-204/SA-204M
Steel Grade : SA-204 Gr.A, SA-204 Gr.C steel.
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time : Promptly ( Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

ASME SA-203 Gr.F Ni-alloy steel plates for pressure vessels

ASME SA-203 Gr.F Ni-alloy steel plates for pressure vessels

Specification :
ASME SA-203 Gr.F is a kind of Ni-alloy steel.The standard of SA-203 Gr.F is ASME SA-203/SA-203M. SA-203 Gr.F is Ni-alloy steel material used to fabric high temperature pressure vessels. Obviously,ASME SA203 this property is based on it's Ni composition. ASME SA-203/SA-203M has grades or levels-- Grade A/B/D/E/F.

1.Standard: ASME SA-203/SA-203M
2.Steel Grade : SA-203 Gr.A, SA-203 Gr.B, SA-203 Gr. D, SA-203 Gr. E steel.
3.Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
4.MOQ: 1 PC
5.Product type : Steel plate
6.Delivery time : Promptly ( Stock) or 10-40 days (Production)
7.Stock : Available
8.MTC: Available
9.Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

JOIN-WIN supply pressure vessels steel plates ASME SA-203 Gr.E

JOIN-WIN supply pressure vessels steel plates ASME SA-203 Gr.E

Specification :
ASME SA-203 Gr.E is a kind of Ni-alloy steel.The standard of SA-203 Gr.E is ASME SA-203/SA-203M. SA-203 Gr.E is Ni-alloy steel material used to fabric high temperature pressure vessels. Obviously,ASME SA203 this property is based on it's Ni composition. ASME SA-203/SA-203M has grades or levels-- Grade A/B/D/E/F.

1.Standard: ASME SA-203/SA-203M
2.Steel Grade : SA-203 Gr.A, SA-203 Gr.B, SA-203 Gr. D, SA-203 Gr.F steel.
3.Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
4.MOQ: 1 PC
5.Product type : Steel plate
6.Delivery time : Promptly ( Stock) or 10-40 days (Production)
7.Stock : Available
8.MTC: Available
9.Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179

Supply ASME SA-203 Gr.D Ni-alloy steel plates for pressure vessels

Supply ASME SA-203 Gr.D Ni-alloy steel plates for pressure vessels

Specification :
ASME SA-203  Gr.D is a kind of Ni-alloy steel.The standard of SA-203  Gr.D is ASME SA-203/SA-203M. SA-203  Gr.D is Ni-alloy steel material used to fabric high temperature pressure vessels. Obviously,ASME SA203 this property is based on it's Ni composition. ASME SA-203/SA-203M has grades or levels-- Grade A/B/D/E/F.

1.Standard: ASME SA-203/SA-203M
2.Steel Grade : SA-203 Gr.A, SA-203 Gr. B, SA-203 Gr.E, SA-203 Gr. F steel.
3.Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
4.MOQ: 1 PC
5.Product type : Steel plate
6.Delivery time : Promptly ( Stock) or 10-40 days (Production)
7.Stock : Available
8.MTC: Available
9.Payment Term : T/T or L/C At sight .

jw(at)steel-jw(dot)com
Skype:join.win
Pandora(at)steel-jw(dot)com
Url www(dot)steel-jw(dot)com
Tel 86,371,65777179